DENEYAP Kart 1A v2 (Type-C)

DENEYAP Kart 1A v2

The most powerful electronic development board of the DENEYAP family is developed using the ESP32-S3-WROOM-1 module.

With the new generation powerful dual core Xtensa LX7 microprocessor, you can start machine learning and artificial intelligence based projects with Tensorflow Lite.

Thanks to its built-in Wi-Fi and Bluetooth communication features, it will enable you to prepare Internet of Things and cloud-based projects.

Using the Wi-Fi communication feature, you can exchange data between your system and your cloud-based application. You can also use your board as a server and set up your own closed-loop wireless communication network.

It has a wide range of peripheral connections such as ADC, PWM, UART, SPI, I2C, TWAI, I2S, Capacitive Sensing, LCD, DVP, RMT, SD/SDIO/MMC, JTAG, Timer, pulse counter and external interrupt. In addition, to give you flexibility, some of these connection interfaces can be used on any pin of your choice according to your needs.

There is a built-in temperature meter integrated into the microprocessor.

It has 23 pins that can be used for general purposes.

There is a dedicated Li-Po connector to help you power your system reliably. Moreover, you can charge your Li-Po battery using this connector. You can also monitor the charge of the connected battery.

On the back of the board there is a micro SD card connector and an FPC camera connector where you can connect the Deneyap Camera.

There are also 2 buttons and 1 addressable RGB LED built-in.

Using the I2C communication connector, you can quickly implement your system consisting of sensors and actuators without wiring and soldering.

You can get 3.3V and 5V voltage output from your board for use in peripherals that you will provide external connection without interruption. Even when feeding your system with a Li-Po battery, the 5V power output will always be with you.

DENEYAP Kart 1A v2 has a design compatible with breadboard. The pins are soldered for you to start developing immediately.

DENEYAP Kart 1A v2 is compatible with Arduino IDE. You can start coding using the instructions.

DENEYAP Kart 1A v2's next-generation LX7 processor has an artificial intelligence (AI) accelerator, boosting signal processing and machine learning performance compared to the first version. 

DENEYAP Kart 1A v2 has Bluetooth 5 version instead of Bluetooth 4.2 version, enabling data exchange with long range (1 km and above) Bluetooth communication called Coded PHY.

The flash and RAM capacity of the DENEYAP Kart 1A v2 can be increased up to 1GB if desired.

The first version of DENEYAP Kart 1A has a magnetic field (hall) sensor while the new version has a built-in temperature meter.